Oven built-in OFFICINA ADVANCE Multiprogram images
Barazza Officina Advance 1FOAP is a 60 cm satin stainless steel built-in Multiprogram oven with 66 litres, eight manual functions, rapid defrost and an electronic cooking programmer.
Barazza Officina Advance 1FOAP is a 60 cm built-in Multiprogram oven in satin stainless steel. The current Barazza product page and 2025–2026 catalogue specify a 66-litre cavity, eight manual functions plus rapid defrost and a maximum temperature of 250 °C. Its clear front and practical controls reflect the professional kitchen inspiration of the Officina collection. The model is intended for a standard width built-in installation, subject to the exact cabinet opening shown in the drawing.
The electronic digital programmer sets the beginning and end of cooking and includes a minute timer. Manual modes provide a choice of heat distribution. Barazza describes bottom heat for pastry and warming dishes, top heat for browning, a traditional grill, grill with fan and fan-assisted heating for even cooking. The circular heating element and fan can be used for similar dishes on more than one level. For rapid defrost, Barazza instructs setting the thermostat to 0 °C and selecting a fan function. Choose the mode and shelf level according to the recipe.
The moulded Easy Clean interior is designed to simplify regular care. The door is extractable and removable, with three heat-reflecting glass panes. Tangential cooling ventilation and one rear light are specified. The supplied equipment is one deep Easy Clean enamelled steel drip tray, one standard Easy Clean enamelled steel tray and one steel rack. These are the pieces included with 1FOAP; the air fryer basket shown among related Barazza accessories is separate. Keep both trays and the rack available so that the cooking level and equipment can be selected for each recipe.
The visible front measures approximately 596 × 596 mm. The installation drawing specifies a cabinet opening 560 mm wide and 580 mm high, with a minimum depth of 550 mm. Compare the front and opening separately before preparing the furniture. The installer should consult the complete drawing for ventilation space and electrical connection. Maximum absorbed power is 2.7 kW and the energy class is A. Check the available electrical circuit and leave the required clearance for safe fitting and cooling.
