Hob built-in Lab Evolution 90 cm images
Barazza Lab Evolution 1PLE2D – 90 cm gas hob, satin stainless steel, 3 Flat Eco-Design, 860 × 490 mm.
Barazza Lab Evolution 1PLE2D is a 90 cm gas hob in satin AISI 304 stainless steel. Its three Flat Eco-Design burners are arranged in a line. It supports standard built-in or flush installation.
The extra-thick stainless steel top, Soft-Touch Flat knobs and cast-iron pan supports combine durable materials with direct control. Different burner outputs let you match the flame to the pan and cooking task.
The standard built-in cut-out is 860 × 490 mm (width × depth). For flush installation, the manufacturer drawing specifies a 883 × 513 mm recess and a 1.2 mm lowering. Check all clearances and the marked connection positions on the drawing before cutting the worktop.
The official drawing marks the gas and electrical connection positions.
The official drawing gives Lab Evolution 1PLE2D an overall top size of 880 × 510 mm (width × depth). This differs from the 860 × 490 mm cut-out in the worktop. Flush mounting uses a separate recess. The 25 kg gross weight and package dimensions describe shipping, not the appliance's net weight.
The burner outputs range from 1.75 to 4 kW, so you can select a flame for the cookware and recipe. The double-ring burner provides the highest output; the smaller burners allow more moderate heating. Cast-iron pan supports keep cookware stable, and the satin steel surface can be wiped clean after cooking.
Before installation, compare the cut-out, worktop construction and connection points with the Barazza technical drawing. A qualified installer should connect the gas appliance in accordance with local requirements. Explore other Lab Evolution models for alternative widths and layouts.
