Hood for wall 120 cm City Glass images
Barazza City Glass 1KCYP12 is a 120 cm wall cooker hood with a 4 mm black tempered glass front and stainless steel filters. Designed especially for induction hobs, it provides three speeds plus intensive extraction, 800 m³/h air flow, 4000 K LED lighting and an adjustable chimney.
Barazza City Glass 1KCYP12 is a wall mounted cooker hood for a 120 cm kitchen module. Its front is made from black tempered glass, 4 mm thick, while the filters are stainless steel. Barazza presents City Glass as a design intended especially for installation above induction hobs, where condensation on the hood surface can be a concern. This is the wall version. Check the wall space, the duct route and the clearance above the hob before choosing its position.
Electronic controls provide three normal speeds and an intensive setting. A lower setting can be selected for lighter cooking, while the intensive mode is available when more steam or cooking fumes are produced. Barazza states an air flow of 800 m³/h and a pressure of 565 Pa. The published noise range is 45–64 Lw(dBA), according to operating level. A strip of LED lighting at 4000 K illuminates the cooking area below the hood. The filters are made from stainless steel and form part of the appliance's distinctive design.
The extraction outlet is Ø 150 mm, and Barazza specifies a reducer to Ø 120 mm. The telescopic chimney adjusts from 77.5 to 105.5 cm. Compare this range with the ceiling height and the planned duct position. The hood is prepared for remote operation through a compatible Barazza scale; the scale is not stated to be included. Stainless steel filters are part of the hood, while the glass front should remain accessible for normal cleaning and maintenance.
The official technical drawing gives an actual front width of 1199 mm for the nominal 120 cm module. Use the drawing to check the remaining dimensions and fixing points before drilling into the wall. The chimney range describes its adjustable height rather than the total height of every completed installation. Plan the duct route for the specific kitchen and check that the position remains accessible for routine care.
