Faucets in solid brass - 6004 Dronning 3-huller
      Faucets in solid brass - 6004 Dronning 3-huller
      Faucets in solid brass - 6004 Dronning 3-huls

      Faucets in solid brass - 6004 Dronning 3-huller

      6.396,00 kr.
      7.995,00 kr.
      Spar 20%
      ⠀⠀
      Inkl. moms

      Faucets in solid brass for three holes with swivel spout and ceramic cartridge.

      This faucets in solid brass is available in : Chrome, brass, browned brass, brushed chrome, bronze, copper or gold. 

      Fås i :
      Antal :

      Vores privatlivspolitik

      Vores privatlivspolitik forklarer vores principper, når det kommer til indsamling, behandling og opbevaring af dine oplysninger. Denne politik forklarer specifikt, hvordan vi bruger cookies, samt de muligheder du har for at kontrollere dem.

      • 1 Hvad er cookies?

        Cookies er små datastykker, der gemmes i tekstfiler, som lagres på din computer eller anden enhed, når hjemmesider indlæses i en browser. De bruges bredt til at "huske" dig og dine præferencer, enten til et enkelt besøg eller til flere gentagne besøg.

      • 2 Hvordan vi bruger cookies

        Vi bruger cookies til en række forskellige formål. Nogle cookies er nødvendige af tekniske årsager; nogle muliggør en personlig oplevelse for både besøgende og registrerede brugere; og nogle tillader visning af reklamer fra udvalgte tredjepartsnetværk.

      • 3 Kontrol af cookies

        Besøgende kan ønske at begrænse brugen af cookies eller helt forhindre dem i at blive indstillet. Hvis du deaktiverer cookies, skal du være opmærksom på, at nogle af funktionerne på vores service muligvis ikke fungerer korrekt.

      • 4 Informationen Vi Indsamler

        Vi indsamler kun oplysninger om dig, hvis vi har en grund til at gøre det - for eksempel for at kunne tilbyde vores tjenester, kommunikere med dig eller forbedre vores tjenester.

      Vi er forpligtet til at opretholde tilliden og fortroligheden hos vores besøgende på hjemmesiden. Vi indsamler, sælger, lejer eller handler ikke med e-mail-lister eller andre data med andre virksomheder og forretninger. Se vores side om privatlivspolitik for at læse detaljerede oplysninger om, hvornår og hvorfor vi indsamler dine personlige oplysninger, hvordan vi bruger dem, de begrænsede betingelser under hvilke vi kan videregive dem til andre, og hvordan vi holder dem sikre.

      Vi kan ændre cookie- og privatlivspolitikken fra tid til anden. Denne politik er gældende fra den 24. maj 2018.

      Faucets in solid brass for three holes with swivel spout and ceramic cartridge.

      This faucets is svailable in: Chrome, brass, browned brass, brushed chrome, bronze, copper or gold. 

      Gold and copper is special order and requires 20 days of production.

      MADE_IN_ITALY.jpg   

      NEW FAS.jpg

      ASSEMBLY INSTRUCTIONS
      A) Before installation, clean the supplying piping throughly.
      B) For washbasin - bidet - sink:
      1) Screw the copper tubes or the hoses to the body (cold water on the right
      - hot water on the left).
      2) Screw the threaded rod M8 x 1 to the body of the tap and position the
      seal on the bottom of the body.
      3) Insert the tap into the ceramic hole and fix it using the iron
      horse and its fixing nut.
      4) Fix the copper pipes or the flexible to the arrival of the hot and cold
      water.
      C)
      For bath - shower - wall sink:
      1) Fix the eccentric fittings to the wall paying attention
      alignment, maintaining a distance between the center of the two
      eccentrics of 150 mm.
      Then screw in the rosettes
      2) Position the gasket inside the 3/4 "shell and tighten
      the latter to the eccentrics, taking care not to damage the caps.
      Faucets in solid Faucets in solid
      WARRANTY
      General warranty conditions.
      Our products are guaranteed for 10 years against any manufacturing defect
      (the warranty does not cover the cost of replacement),
      The warranty starts from the date of purchase and the invoice or receipt
      confirms this.
      To be able to verify any defects, therefore, to help us improve the reliability of
      our products, the items must be returned to be tested, ex our factory.
      If the result of our tests reveals any manufacturing defect, the guarantee will
      intervene and, consequently, we will provide either a development or
      replacement of the product.
      It is important not to conform to a manufacturing defect with normal wear and
      tear (warranty and maintenance).
      The warranty is granted only on manufacturing defects and normal wear is
      excluded (see exclusions).
      The warranty on the external finishes of the items is one year from the date of
      purchase (as proof of receipt or invoice).
      EXCLUSIONS
      1) Installation not carried out to norms and rules of art:
      - pipe diameter not respected: this can cause or a large one
      increase or decrease in the range.
      2) Incorrect assembly or improper use:
      - pressure too high (over the maximum allowed value of 3 bar):
      - tube inversion (hot and cold)
      3) External bodies transported by water that deteriorate the mechanism or the
      coating. We recommend washing the pipes before installation.
      4) Damages caused by water composition:
      - Eg large amount of limestone in the water that affects the mechanism or
      the coating.
      The use of a filter is recommended.
      5) Normal wear of the mechanism, of the rubber part, of the dynamic joints:
      - replacement of the rubber part, joints, cartridges after verification.
      6) Lack of maintenance, no filter cleaning, greasing:
      - reduced flow rate from scale deposits in the filter
      - limestone deposits that alter the coatings
      - greasing of dynamic rubber joints (every year)
      7) Break due to ice:
      - uninsulated pipes
      - it is advisable to drain the water system, especially in second homes.
      8) Surface cleaning with unsuitable products (alcohol, abrasives, acids ... .);
      products also containing a small percentage of ammonia and acetone
      (cleaning products).
      We recommend neutral soap + warm water + soft cloth.
      9) Deterioration resulting from an abnormal assembly:
      - incompetent intervention - deteriorated seals;
      - broken parts - wrong reassembly: closure too tight.
      Breakage of the pieces
      10) Production of hot water not sufficient for operation
      - water heater or water heater too weak (eg for complete bathroom);
      - low hydraulic pressure on instantaneous water heater.
      6004 Dronning

      Specifikke referencer

      Faucets in solid brass - 6004 Dronning 3-huls

      Faucets in solid brass - 6004 Dronning 3-huller

      6.396,00 kr.
      7.995,00 kr.
      Spar 20%
      ⠀⠀
      Inkl. moms