Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm
    • Tiles in lava rock with icing 1 cm

    Tiles in lava stone glazed 1 cm

    Ask For Price

    kr4,950.00
    Tax included
    Delivery 6-8 weeks

    Tiles in lava stone with glaze for kitchens and bathrooms-suitable for both indoor and outdoor use.

    Size :
    Quantity :

    The tiles of glazed lava stone is particularly suitable for both indoor and outdoor use.

    The transport price will be calculated based on the weight of the tiles.

    Price is per square meter

    All RAL color

    TECHNICAL FEATURES

    Bulk specific gravity: 2.795 Kg/mc

    Water absorption value: 10,20 %

    Compression breaking load: 113,4Mpa

    Elastic tangent modulus: 25,032MPa

    Elastic secant modulus: 18,347 MPA

    Breaking load due to indirect traction by means of bending: 10,7 MPa

    Wear due to sliding friction: abrasion coefficient in Tribometer: 4,37 mm

    Resistance to breakage on impact (minimum fall height): 63 cm

    Knoop micro hardness: 4825 MPa

    PHYSICAL CHARACTERISTICS

    Average volume weight - 2.658 gr/cmc

    Actual specific weight - 2.856 gr/cmc

    Porosity - 6.93%

    Average compression strength - 1642 kg/cmq

    Frost shattering - 1930 kg/cmq

    Resistance to wear - 0.64

    Shattering coefficient - 115.8

    Resistance to bending - 167.2 kg/cmq

    Total breaking load - 0.275 mm

    The Lava stone may be subject to variations in shade and occasional “aesthetic imperfections” that are just peculiar characteristic of both natural stone and handcrafted finishing.

    The understanding of the gray and enameled lava stone features is a crucial step, through which our partners and our customers will fulfill their expectations as regards quality and beauty.

    Buying a lava stone product, you should be aware that the product may, on occasions, include: pinhole cavities, darker spots, green spots, mineral spots, for which there is a tolerance parameter as shown in the photos.

    Another peculiarity of the lava product is the possible slight variation in the size, in the range of +/- 1.5 mm, due to the dilatation during the firing.

    The enameling process itself may cause a variation in the thickness of the piece, in the range of +/- 0.5 mm.

    It is also possible that the pieces bend slightly (2/4mm approximately).

    Fliser i lavasten glasur 1 cm

    Specific References

    5 other products in the same category:

    Tiles in lava rock with icing 1 cm

    Tiles in lava stone glazed 1 cm

    kr4,950.00
    Tax included